Cisco Systems 1080P12X Manual De Usuario
18
Cisco TelePresence PrecisionHD Camera
PrecisionHD Camera User guide
D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.
© 2010-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com
PrecisionHD 1080p12x
The information on this page applies to the PrecisionHD
1080p12x camera. The camera has DIP switches for video
output format setting.
NOTE:
The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD 1080p4x camera (the
PrecisionHD 1080p
4x* camera). The interim version has DIP
switches for video output format setting, see the table on this
page.
Video output formats
The DIP switches 1 to 5 sets the video output format for the
camera. The DIP switches are located under the camera. The
default setting is
Auto, see the table to the right.
Maximum resolution:
•
1080p60 for PrecisionHD 1080p12x zoom
•
1080p30 for PrecisionHD 1080p4x* zoom
•
1080p30 for HD-SDI**
line voltage frequency
The camera will automatically detect the line voltage frequency
when it is 50 or 60 Hz. If there is a different line voltage, you
can set the video output format to a specific value (use the DIP
switches) to override the auto frequency detection.
Set the PrecisionHD 1080p DIP switch (country specific
setting):
•
50Hz: 00011, gives 1080p50 (720p50 for HD-SDI)
•
60Hz: 00100, gives 1080p60 (720p60 for HD-SDI)
DIP Switch table for video output formats
1
2
3
4
5
HDMI
HD-SDI**
0
0
0
0
0
Auto
0
0
0
0
1
1920x1080p25
1920x1080p25
0
0
0
1
0
1920x1080p30
1920x1080p30
0
0
0
1
1
1920x1080p50**
1280x720p50***
0
0
1
0
0
1920x1080p60**
1280x720p60***
0
0
1
0
1
1280x720p25
1280x720p25
0
0
1
1
0
1280x720p30
1280x720p30
0
0
1
1
1
1280x720p50**
1280x720p50***
0
1
0
0
0
1280x720p60**
1280x720p60***
0
1
0
0
1
Software control
The table shows the different settings available
for the HDMI and the HD-SDI outputs.
Auto: Camera negotiates format over HDMI.
Auto: Camera negotiates format over HDMI.
HD-SDI tracks HDMI and defaults to 1080p30 in
absence of HDMI sync.
Software: For more on the Software control
Software: For more on the Software control
setting, read about video mode selections in the
.
* Available for a limited period of time.
** Not supported with Codec C20.
*** Do not use with the PrecisionHD 1080p4x* camera.
DIP switch table
PrecisionHD 1080p12x, from below
The DIP switches 1 to 5
0
1
Contents
Appendices
Introduction
The physical interface
Connecting the camera
Video output formats
Daisy chaning
Video output formats