Cisco Systems ASA 5580 Manual De Usuario
4-11
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 4 Configuring Network Object NAT
Configuring Network Object NAT
The following example configures dynamic PAT with a PAT pool to translate the inside IPv6 network to
an outside IPv4 network:
an outside IPv4 network:
ciscoasa(config)# object network IPv4_POOL
ciscoasa(config-network-object)# range 203.0.113.1 203.0.113.254
ciscoasa(config)# object network IPv6_INSIDE
ciscoasa(config-network-object)# subnet 2001:DB8::/96
ciscoasa(config-network-object)# nat (inside,outside) dynamic pat-pool IPv4_POOL
Configuring Static NAT or Static NAT-with-Port-Translation
This section describes how to configure a static NAT rule using network object NAT. For more
information, see the
information, see the
.
Detailed Steps
Command
Purpose
Step 1
(Optional) Create a network object or group for
the mapped addresses.
the mapped addresses.
.
Step 2
object network
obj_name
Example:
ciscoasa(config)# object network
my-host-obj1
Configures a network object for which you want to configure
NAT, or enters object network configuration mode for an existing
network object.
NAT, or enters object network configuration mode for an existing
network object.