Cisco Systems ASA 5580 Manual De Usuario

11-3

Cisco ASA Series Firewall CLI Configuration Guide

Chapter 11 Configuring Inspection for Voice and Video Protocols

H.323 Inspection

The line beginning with

RTP/RTCP: PAT xlates:

appears only if an internal CTI device has registered

with an external CallManager and the CTI device address and ports are PATed to that external interface.
This line does not appear if the CallManager is located on an internal interface, or if the internal CTI
device address and ports are translated to the same external interface that is used by the CallManager.

The output indicates a call has been established between this CTI device and another phone at
172.29.1.88. The RTP and RTCP listening ports of the other phone are UDP 26822 and 26823. The other
phone locates on the same interface as the CallManager because the ASA does not maintain a CTIQBE
session record associated with the second phone and CallManager. The active call leg on the CTI device
side can be identified with Device ID 27 and Call ID 0.

The following is sample output from the show xlate debug command for these CTIBQE connections:

ciscoasa# show xlate debug

3 in use, 3 most used

Flags: D - DNS, d - dump, I - identity, i - inside, n - no random,

r - portmap, s - static

TCP PAT from inside:10.0.0.99/1117 to outside:172.29.1.99/1025 flags ri idle 0:00:22

timeout 0:00:30

UDP PAT from inside:10.0.0.99/16908 to outside:172.29.1.99/1028 flags ri idle 0:00:00

timeout 0:04:10

UDP PAT from inside:10.0.0.99/16909 to outside:172.29.1.99/1029 flags ri idle 0:00:23

timeout 0:04:10

The show conn state ctiqbe command displays the status of CTIQBE connections. In the output, the
media connections allocated by the CTIQBE inspection engine are denoted by a ‘C’ flag. The following
is sample output from the show conn state ctiqbe command:

ciscoasa# show conn state ctiqbe

1 in use, 10 most used

ciscoasa# show conn state ctiqbe detail

1 in use, 10 most used

Flags: A - awaiting inside ACK to SYN, a - awaiting outside ACK to SYN,

B - initial SYN from outside, C - CTIQBE media, D - DNS, d - dump,

E - outside back connection, F - outside FIN, f - inside FIN,

G - group, g - MGCP, H - H.323, h - H.225.0, I - inbound data,

i - incomplete, J - GTP, j - GTP data, k - Skinny media,

M - SMTP data, m - SIP media, O - outbound data, P - inside back connection,

q - SQL*Net data, R - outside acknowledged FIN,

R - UDP RPC, r - inside acknowledged FIN, S - awaiting inside SYN,