Cisco Systems ASA 5580 Manual De Usuario
20-13
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 20 Configuring Cisco Intercompany Media Engine Proxy
Configuring Cisco Intercompany Media Engine Proxy
What to Do Next
Create the ACLs for the Cisco Intercompany Media Engine Proxy. See
Configuring PAT for the Cisco UCM Server
Perform this task as an alternative to configuring NAT for the Cisco Intercompany Media Engine Proxy.
Figure 20-7
Example for Configuring PAT for a Deployment
Note
You only perform this step when NAT is not configured for the Cisco UCM server.
To configure PAT for the Cisco UCM server, perform the following steps:
Step 8
hostname(config-network-object)# exit
Exits from the objects configuration mode.
Step 9
hostname(config)# nat (inside,outside) source static
real_obj mapped_obj
Examples:
hostname(config)# nat (inside,outside) source static
ucm_real_192.168.10.30 ucm_209.165.200.228
hostname(config)# nat (inside,outside) source static
ucm_real_192.168.10.31 ucm_209.165.200.228
Specifies the address translation on the network
objects created in this procedure.
objects created in this procedure.
Where real_obj is the name that you created in
in this task.
Where mapped_obj is the name that you created in
in this task.
Command
Purpose
Local Cisco UCM
Local ASA
Corporate
Network
Local Enterprise
IP
IP
IP
192.168.10.30
TLS
TCP
M
248765
Internet
Outside Cisco UCM address
209.165.200.228
Configure PAT:
192.168.10.30:5070
192.168.10.30:5071
192.168.10.30:5070
192.168.10.30:5071
209.165.200.228:5570
209.165.200.228:5571
209.165.200.228:5571