Cisco Systems 3750E Manual De Usuario
11-13
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Chapter 11 Configuring Interface Characteristics
Understanding Interface Types
Figure 11-3
Connecting a Switch Stack to a PC
By default, the Ethernet management port is enabled. The switch cannot route packets from the Ethernet
management port to a network port, and the reverse.
management port to a network port, and the reverse.
Even though the Ethernet management port does not support routing, you might need to enable routing
protocols on the port. For example, in
protocols on the port. For example, in
, you must enable routing protocols on the Ethernet
management port when the PC is multiple hops away from the switch and the packets must pass through
multiple Layer 3 devices to reach the PC.
multiple Layer 3 devices to reach the PC.
Figure 11-4
Network Example with Routing Protocols Enabled
Ethernet management ports
Catalyst 3750-E-only switch stack
Stack member 1
Stack member 2
Stack member 3
Stack member 4
Stack member 5
Stack member 6
Stack member 7
157550
PC
Hub
Mixed switch stack with
Catalyst 3750-E and 3750 switches
Catalyst 3750-E member 1
Catalyst 3750 member 2
Catalyst 3750 member 3
Catalyst 3750-E member 4
Catalyst 3750-E member 5
Catalyst 3750-E member 6
Catalyst 3750-E member 7
PC
Hub
Ethernet management ports
157551
Switch
PC
Network
cloud
Network
cloud
Ethernet
management
port
management
port
Network
ports
ports