Cisco Systems 3750E Manual De Usuario

Descargar
Página de 1236
 
22-5
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Chapter 22      Configuring DHCP Features and IP Source Guard
Understanding DHCP Features
Remote-ID suboption fields
Suboption type
Length of the suboption type
Remote-ID type
Length of the remote-ID type
In the port field of the circuit ID suboption, the port numbers start at 3. For example, on a 
Catalyst 3750-E switch with 24 10/100/1000 ports and four small form-factor pluggable (SFP) module 
slots, port 3 is the Gigabit Ethernet 1/0/1 port, port 4 is the Gigabit Ethernet 1/0/2 port, and so forth. 
Port 27 is the SFP module slot Gigabit Ethernet1/0/25, and so forth.
 shows the packet formats for the remote-ID suboption and the circuit-ID suboption when 
the default suboption configuration is used. For the circuit-ID suboption, the module number 
corresponds to the switch number in the stack. The switch uses the packet formats when you globally 
enable DHCP snooping and enter the ip dhcp snooping information option global configuration 
command.
Figure 22-2
Suboption Packet Formats
 shows the packet formats for user-configured remote-ID and circuit-ID suboptions The 
switch uses these packet formats when DHCP snooping is globally enabled and when the ip dhcp 
snooping information option format remote-id 
global configuration command and the ip dhcp 
snooping vlan
 information option format-type circuit-id string interface configuration command are 
entered. 
Length
Length
Circuit
ID type
Suboption
type
Circuit ID Suboption Frame Format
Remote ID Suboption Frame Format
6 bytes
MAC address
1 byte 1 byte 1 byte
Suboption
type
1 byte
Length
Length
Remote
ID type
1 byte 1 byte 1 byte
1 byte
116300
4
0
6
1
6
0
8
2
Module Port
1 byte 1 byte
2 bytes
VLAN