Axxess Interface 8690 Manual De Usuario
41
Axxess
®
Model 8690 User Guide – ITP Mode
GETTING ST
ARTED
Placing Intercom Calls
To place an intercom call:
1.
With or without the handset lifted, dial an extension number.
2.
If your call goes through handsfree to an endpoint’s speaker, speak after you hear
a double tone.
a double tone.
If you hear continuous ringing, wait for the call to be answered.
The system allows you to place a non-handsfree call that will override handsfree
mode on the extension you are calling. If you choose to use the Ring Intercom
Always feature to always send non-handsfree calls, the called party must pick up the
handset to answer the call.
mode on the extension you are calling. If you choose to use the Ring Intercom
Always feature to always send non-handsfree calls, the called party must pick up the
handset to answer the call.
To place a non-handsfree call that will ring at the other endpoint until answered:
Press
before dialing the extension number.
NOTE:
Dialing
before the extension number forces the called extension to ring
and overrides the handsfree option.
To program your endpoint to always send non-handsfree calls using the Ring
Intercom Always feature:
Intercom Always feature:
With the handset in the cradle, dial
. The current status is shown.
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
• To leave a station message: Press
you can do any of the following:
• To leave a station message: Press
Message
or the
LEAVE MESSAGE
menu but-
ton and then hang up.
• To leave a voice mail message: Press
Message
or the
LEAVE VOICE MAIL
menu
button and wait for the message center to answer. (See
for more message
options.)
NOTE:
This option is only available if the called endpoint has a voice mailbox.
• To camp onto a busy extension: Stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
music until the endpoint is available.
NOTE:
You cannot camp on to an endpoint if it is in DND mode.
• To request a callback (queue on to the endpoint): Press
and hang up. When
the endpoint is available, your endpoint rings. (To cancel the queue request
before the callback, press
before the callback, press
.)
#
#
3
7
7
6
6