Cisco Systems ASA 5585-X Manual De Usuario

Descargar
Página de 712
 
15-18
Cisco ASA Series Firewall CLI Configuration Guide
 
Chapter 15      Using the Cisco Unified Communication Wizard
  Configuring the UC-IME by using the Unified Communication Wizard
Step 2
Click Next
Basic Deployment
In a basic deployment, the Cisco Intercompany Media Engine Proxy sits in-line with the Internet firewall 
such that all Internet traffic traverses the ASA. In this deployment, a single Cisco UCM or a Cisco UCM 
cluster is centrally deployed within the enterprise, along with a Cisco Intercompany Media Engine server 
(and perhaps a backup). A single Internet connection traverses the ASA, which is enabled with the Cisco 
Intercompany Media Engine Proxy.
The ASA sits on the edge of the enterprise and inspects SIP signaling by creating dynamic SIP trunks 
between enterprises.
Off-path Deployment
In an off path deployment, inbound and outbound Cisco Intercompany Media Engine calls pass through 
an ASA enabled with the Cisco Intercompany Media Engine Proxy. The ASA is located in the DMZ and 
configured to support primarily Cisco Intercompany Media Engine. Normal Internet facing traffic does 
not flow through this ASA. 
For all inbound calls, the signaling is directed to the ASA because destined Cisco UCMs are configured 
with the global IP address on the ASA. For outbound calls, the called party could be any IP address on 
the Internet; therefore, the ASA is configured with a mapping service that dynamically provides an 
internal IP address on the ASA for each global IP address of the called party on the Internet. 
Cisco UCM sends all outbound calls directly to the mapped internal IP address on the ASA instead of 
the global IP address of the called party on the Internet. The ASA then forwards the calls to the global 
IP address of the called party. 
Note
When you configure the Cisco Intercompany Media Engine for an off-path deployment, you must ensure 
that the public IP addresses and ports of the Cisco Unified Communications Manager servers and the 
public IP address for the media termination address are accessible from the Internet. The summary page 
of the Unified Communication Wizard reminds you of the requirements.
Configuring the Private Network Settings for the Cisco Intercompany Media 
Engine Proxy
When configuring the Cisco Intercompany Media Engine Proxy, you specify settings to define the 
private network topology, such the private network interface, the IP addresses of the Cisco Unified 
Communications servers, and ticket verification. Additionally, when the Cisco Unified Communications 
servers are operating in secure mode, you specify the X.509 subject name for the Cisco Intercompany 
Media Engine Proxy, 
The values that you specify in this page generate the following configuration settings for the Cisco 
Intercompany Media Engine Proxy: 
The list of Cisco Unified Communications servers
The ticket epoch and password used by the Cisco Intercompany Media Engine Proxy
For an off-path deployment only, the mapping service on the same interface as the Cisco Unified 
Communications server