GE JTP90 Manual De Usuario

Open oven door and remove literature
pack and oven racks. Open microwave
door and remove shelves and turntable
package.

Remove Installation Instructions
from literature pack and read them
carefully before you begin.

Be sure to place all literature,
Owner’s Manual, Installations, etc.
in a safe place for future reference.

Remove packaging materials. Check
inside microwave, behind hinges and
under false bottom. Remove labels on
the outside of the door, plastic on trims
and panel, all tape around the oven
and any shipping screws securing the
oven to the base pad.

Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:

Open the oven door as far as it will go.

Push both hinge
locks down toward
the door frame,
to the unlocked
position. This may
require a flat blade
screwdriver.

Place hands on both sides of
the door, and close the oven
door to the removal position,
which is most of the way closed.
Lift door up and
out until the
hinge arms
clear the slots.

Place the oven on a table or platform even
with the cutout opening. (Platform must
support 255 lbs. [115 Kg].)
Remove the bottom trim from the top
of the oven. It will be installed at the end
of the installation process. The trim is
wrapped separately and taped to the
top of the unit.