Harbor Freight Tools 37793 Manual De Usuario

Page 3

SKU 37793

For technical questions, please call 1-800-444-3353.

tools should electrically malfunction or break down, grounding provides a low resistance

path to carry electricity away from the user.

double insulated tools are equipped with a polarized plug (one blade is wider than

the other). This plug will fit in a polarized outlet only one way. If the plug does

not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install a polarized outlet. do not change the plug in any way. Double

insulation

eliminates the need for the three wire grounded power cord and grounded

power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and

refrigerators. There is an increased risk of electric shock if your body is grounded.
do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

do not abuse the Power cord. never use the Power cord to carry the tools or pull

the Plug from an outlet. Keep the Power cord away from heat, oil, sharp edges, or

moving parts. Replace damaged Power cords immediately. Damaged Power Cords

increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked “W-A”

or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric

shock.

PeRSonAl SAFetY

Stay alert. Watch what you are doing, and use common sense when operating

a power tool. Do not use a power tool while tired or under the influence of

drugs, alcohol, or medication. A moment of inattention while operating power

tools may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Power Switch is off before plugging

in. Carrying power tools with your finger on the Power Switch, or plugging in power

tools with the Power Switch on, invites accidents.
Remove adjusting keys or wrenches before turning the power tool on. A

wrench or a key that is left attached to a rotating part of the power tool may result

in personal injury.
do not overreach. Keep proper footing and balance at all times. Proper footing

and balance enables better control of the power tool in unexpected situations.
use safety equipment. Always wear eye protection. Dust mask, non-skid safety

shoes, hard hat, or hearing protection must be used for appropriate conditions.