Videk 2030 Manual De Usuario
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -
25
Save Settings
2.. - Continuous Scan - Sleep Time Out
Scan one of the codes below to set the amount of time a cabled VS 2030 will operate in continuous scan
mode before entering sleep mode:
mode before entering sleep mode:
Cabled - 2 hours
Cabled - Always (Default)
Scan one of the codes below to set the amount of time an uncabled VS 2030 will operate in continuous
scan mode before entering sleep mode:
scan mode before entering sleep mode:
Uncabled - 5 minutes (Default)
Uncabled - 5 Minutes
Uncabled - 30 Minutes
Note: This function is only recommended for short term use because of battery consumption.
2..2 - Continuous Scan - Trigger Delays
Scan the following codes to set delay time between scans:
0 Seconds (Default)
Second
3 Seconds
2..3 - Continuous Scan - Duplicate Scan Suppression
Scan the following codes to set the period of time during which duplicate codes are ignored:
0 Seconds (Default)
Second
3 Seconds
2. - Continuous Scan Settings
2.2 - Motion Detection Scan Settings
Scan the following codes to set the reader to read when it detects motion in its scanning zone.
Motion Detection On
Motion Detection On
Motion Detection Off