Philips M1191BL Manual De Usuario
7
Applying Hand/Foot Sensors
Neonatal hand or foot, for patients between 1kg and 4kg.
•
•
A-Series: M1193A
•
Special Edition (SE) A-Series: M1193AN
Applying Ear-Clip Sensors
Adult or pediatric ear, for patients more than 40kg.
•
•
A-Series: M1194A, or
•
Special Edition (SE) A-Series: M1194AN
Step
Applying the Hand/Foot Sensor
1
Position the sensor over the hand or foot with optical components
opposite each other.
opposite each other.
2
Holding sensor, stretch strap slightly (not more than 2.5cm (1.0”).
3
Insert stretched strap into slot, hold it there while threading end
through latch. If strap is too long, thread it through second latch.
through latch. If strap is too long, thread it through second latch.
4
Plug sensor into instrument (or into adapter cable if needed).
5
Inspect and change the sensor application site periodically.
Step
Applying the Ear-Clip Sensor
1
To improve perfusion, massage or warm the ear lobe.
2
Clip probe onto fleshy part of the lobe. Plastic fixing mechanism
minimizes artifact generated by patient motion. Do not position
probe on cartilage or pressed against the head.
minimizes artifact generated by patient motion. Do not position
probe on cartilage or pressed against the head.
3
Plug sensor into instrument (or into adapter cable if needed).
4
Inspect and change the sensor application site periodically.