ZyXEL 336M 91-003-192001B Manual De Usuario
Los códigos de productos
91-003-192001B
ZyXEL P-336M User’s Guide
Chapter 3 Basic
38
Figure 13 Basic: Wireless: WLAN Security Setup: WEP
The following table describes the related fields in this screen.
Table 12 Basic: Wireless: WLAN Security Setup: WEP
LABEL
DESCRIPTION
WEP
WEP Key Length WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the
wireless network.
Select 64-bit or 128-bit to use data encryption.
Select 64-bit or 128-bit to use data encryption.
Passphrase
Enter a "passphrase" (password phrase) of up to 63 case-sensitive printable
characters and click Generate to have the P-336M create four different WEP keys.
Generate
After you enter the passphrase, click Generate to have the P-336M generate four
different WEP keys automatically. The keys display in the fields below.
Key 1 .. 4
The WEP keys are used to encrypt data. Both the P-336M and the wireless stations
must use the same WEP key for data transmission.
If you want to manually set the WEP keys, enter the key in the field provided.
If you chose 64-bit, then enter any 5 ASCII characters or 10 hexadecimal characters
If you want to manually set the WEP keys, enter the key in the field provided.
If you chose 64-bit, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bit, then enter 13 ASCII characters or 26 hexadecimal characters
If you chose 128-bit, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
The values for the WEP keys must be set up exactly the same on all wireless
The values for the WEP keys must be set up exactly the same on all wireless
devices in the same wireless LAN.
You must configure all four keys, but only one key can be used at any one time. The
You must configure all four keys, but only one key can be used at any one time. The
default key is key 1.
Default Key
Select a default WEP key to use for data encryption.
Authentication
Select an authentication method. Choices are Shared Key and Open.