Cisco Systems ASR 901 10G Manual De Usuario
3-8
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
Chapter 3 Installing the Cisco ASR 901 10G Router
Mounting the Cisco ASR 901 10G Router
Attaching Brackets for Wall-Mounting
Perform the steps given below to attach brackets on the router for wall-mounting.
Step 1
Locate the mounting holes of the router.
Step 2
Align the wall-mounting bracket with the router and position with the four Number 6-32 x 0.25-inch
screws (provided). See
screws (provided). See
Step 3
Insert the screws (in four places) and tighten using a Number 2 Phillips screwdriver (on each side).
Step 4
Position the router in the equipment rack lining up the bracket holes on the router with the holes on the
rack and secure with four Number 6-32 x 0.25-inch mounting screws (two on each side).
rack and secure with four Number 6-32 x 0.25-inch mounting screws (two on each side).
Step 5
Tighten the screws using a 1/4-inch flat-blade screwdriver (on each side).
Figure 3-5
Attaching 19-inch Bracket to Wall-Mount the Router
Mounting the Router on a Wall
The router can be wall mounted with the ports either facing up or down. The illustration used in the
procedure below uses the orientation of ports facing upwards.
procedure below uses the orientation of ports facing upwards.
1
Phillips truss-head screws
2
—