Cisco Systems ASR 901 10G Manual De Usuario
B-5
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
Appendix B Cable Specifications
Console Port Signals and Pinouts
lists the pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable,
and the RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL).
Identifying a Rollover Cable
To identify a rollover cable, compare the modular plugs at the two ends of the cable. When you hold the
plugs side by side, with the tab at the back, the wire connected to the pin on the outside of the left plug
should be the same color as the wire connected to the pin on the outside of the right plug (
plugs side by side, with the tab at the back, the wire connected to the pin on the outside of the left plug
should be the same color as the wire connected to the pin on the outside of the right plug (
If you purchased your cable from Cisco Systems, pin 1 is white on one connector, and pin 8 is white on
the other (a rollover cable connects pins 1 and 8, 2 and 7, 3 and 6, and 4 and 5).
the other (a rollover cable connects pins 1 and 8, 2 and 7, 3 and 6, and 4 and 5).
DSR/DCD
7
2
4
DTR
CTS
8
1
1
7
RTS
1.
Pin 1 is connected internally to pin 8.
Table B-4
Console Port Signaling and Cabling Using a DB-9 Adapter
Console
Port (DTE)
Port (DTE)
RJ-45-to-RJ-45 Rollover Cable
RJ-45-to-DB-9
Terminal Adapter
(Connected to Rollover
Cable)
Terminal Adapter
(Connected to Rollover
Cable)
Console
Device
Device
Signal
RJ-45 Pin
RJ-45 Pin
DB-9 Pin
Signal
Table B-5
Console Port Signaling and Cabling Using a DB-25 Adapter
Console
Port (DTE)
Port (DTE)
RJ-45-to-RJ-45 Rollover Cable
RJ-45-to-DB-25
Terminal Adapter
Terminal Adapter
Console
Device
Device
Signal
RJ-45 Pin
RJ-45 Pin
DB-25 Pin
Signal
RTS
1
1
1.
Pin 1 is connected internally to pin 8.
8
5
CTS
DTR
2
7
6
DSR/DCD
TxD
3
6
3
RxD
GND/RI
4
5
7
GND
GND
5
4
7
GND/RI
RxD
6
3
2
TxD
DSR/DCD
7
2
20
DTR
CTS
8
2
1
4
RTS