Chicago Electric 42933 Manual De Usuario

SKU 42933 

Page 13

and secure the arm angle for various miter 

positions. Positive index stops are 0, 15, 

30, 45, and 60° (left and right). Non-index 

stops can also be set within the range of 

the arm assembly.

Yoke pivot- The Yoke Index Knob, located 

at the top of the Yoke (under the Carriage 

Arm) indexes the Yoke horizontally to 0° 

(crosscuts) or 90° (for rip cuts). Loosen the 

Yoke Pivot Clamp Handle and pull out the 

Yoke Index Knob. Turn the motor assem-

bly until it locks at the index position. Lock 

the Yoke Pivot Clamp Handle.

Blade Angle – The Bevel Index Knob (74) 

and the Bevel Lock Knob (71) are used to 

set the Blade angle (variable or indexed). 

Loosen the Bevel Index Knob (71). Turn 

the motor assembly clockwise or counter-

clockwise to the index notch of 0, 45, or 

90°, or to a variable position without using 

the index notch. Tighten the Bevel Lock 

Knob by turning clockwise.

Depth of cut – The Elevating Handle 

(100) at the rear of the arm is used to raise 

and lower the height of the Saw Blade.  

Turn the Elevating Handle clockwise to 

raise the Saw Blade or counterclockwise 

to lower it.