Craftsman 137.21807 Manual De Usuario

18

19

18

19

5.  Assemble the other upper supports 

in exactly the same manner.

6.  Attach one bottom support (5) to the 

center of the leg using bolt (3) and 

nut (4). This completes the front 

frame section.

7.  Assemble rear frame section in 

exactly the same manner.

8.  Join front-bottom and rear-bottom 

frame assemblies using the bottom 

support (7), bolts and nuts.

1.  Place stand upside down on level 

surface or floor.

2.  Place bottom support bracket for roller 

wheel (18) inner of the front leg (2).

3.  Insert the bolt (12) through the roller 

wheel bracket (11), front leg (2), 

bottom support bracket (18) and nut 

(13) as shown. Tighten the nut.

4.  Attach the roller wheel (14) to roller 

wheel bracket (11), bolt (15) and lock 

nut (16) using square neck bolt (15) 

and lock nut (16) as shown.

NOTE: Do not overtighten nut as 

this will not allow the wheels to turn.

1.  Unpack all parts and group by type 

and size. Refer to the parts list for 

correct quantities.

2.  Attach four hooks (10) to the top 

corner of the four legs (2) as shown. 

The hooks (10) are used to hold the 

dust bag.

NOTE: Make sure the hook (10) is 

securely fastened to the corner of 

the leg (2).

3.  Attach one long upper support with 

label (1) to top of leg (2) using one 

bolt (3) and nut (4).

●   Align detents (8) in stand leg 

with support brackets to ensure 

proper fit.

●   Do not tighten bolts until stand is 

properly aligned.

●  Position all supports to the 

INSIDE of the leg assembles.

4.  Attach short upper supports (6) to 

other hole of leg (2) using one bolt 

and nut.

6

2

3

4

10

8

1

10

2

10

7

5

1

6

2