Graco 310692C Manual De Usuario
Setup
310692C
9
Setup
Flushing the gun
1.
To flush the gun, use a solvent that is compatible
with paint to be sprayed. Hold a metal part of the
gun firmly to a grounded metal pail. Trigger the gun
to flush solvent through gun.
with paint to be sprayed. Hold a metal part of the
gun firmly to a grounded metal pail. Trigger the gun
to flush solvent through gun.
Connecting the air line
2.
Install an air pressure regulator (F). See F
. 1.
3.
Install an air filter (G). See F
. 1.
4.
Use a 5/16 inch (7.9 mm) I.D. air hose to minimize
excessive pressure drop in the hose.
excessive pressure drop in the hose.
5.
Connect the air hose (D) to the 1/4 npsm gun air
inlet (C).
inlet (C).
6.
Connect the other end of the air hose (D) to a regu-
lated air supply line.
lated air supply line.
Flush the spray gun before putting any paint
through the gun.
through the gun.
WARNING
F
IG
. 2
ti4836a
F
IG
. 3
F
IG
. 4
ti4837a
C
D
ti4838a
D