Graco 261800 Manual De Usuario

1. Turn AllControl to OFF. Pause 2-3 seconds to 

allow pressure to be relieved, then turn to 
STORAGE.

2. Engage trigger lock. 

3. Leave gun attached to hose. 

4. Remove tip and guard and 

clean with water or flushing 
solvent. A soft brush can be 
used to loosen and remove 
dried on material if needed.

5. Wipe paint off outside of gun using a soft cloth 

moistened with water or flushing solvent. 

1. HOPPER METHOD: Place prime tube in waste 

pail. Pour 8 oz. of Pump Armor into hopper.

IMMERSION METHOD: Place suction tube in 
Pump Armor storage fluid bottle and prime tube 
in waste pail.

2. Set AllControl to 

PRIME/CLEAN PUMP.

3. When storage fluid comes out 

of prime tube (5-10 seconds) 
turn AllControl to OFF.

4. Wait 2-3 seconds to allow 

pressure to be relieved, then 
turn AllControl to STORAGE.

ti9168a

Pause 

2-3 Seconds

ti9174a

ti8923a

ti9671a

•

Always circulate Pump Armor storage fluid 
through system after cleaning. Water left 
in sprayer will corrode and ruin pump.

•

Follow Shutdown and Cleaning 
instructions starting on page 20 or 23.

TIA

ti9169a

ti9168a

ti9174