Graco 261800 Manual De Usuario

Keep sprayer and all 
accessories clean and in 
good working order.

To avoid overheating 
motor, keep vent holes in 
shroud clear for air flow.

Do not cover sprayer while spraying.

Check hose for damage every time you spray. Do 
not attempt to repair hose if hose jacket or fittings 
are damaged. Wrench tighten, using two 
wrenches.

•

Always clean tips with 
compatible solvent and 
brush after spraying.

•

Tips may require 
replacement after 15 gal-
lons (57 liters) or they 
may last through 60 gal-
lons (227 liters) depend-
ing on abrasiveness of paint.

•

Do not spray with worn tip.

When pump packings wear, paint will begin to leak 
down outside of pump. Replace pump packings at 
first sign of leaking or additional damage could 
occur. Get a pump repair kit and install according 
to instruction on kit packaging. Consult a 
Graco/M

AGNUM

 authorized service center.

Protect the internal drive parts of this sprayer 
from water. Openings in shroud allow cooling of 
mechanical parts and electronics inside. If water 
gets into these openings, the sprayer could mal-
function or be permanently damaged.

WLD