Graco 261800 Manual De Usuario

Follow this Pressure Relief Procedure when you 
stop spraying and before cleaning, checking, ser-
vicing, or transporting equipment. 

1. Set AllControl to OFF. 

Unplug sprayer.

2. Hold gun firmly to the side of a pail. Trigger the 

gun to relieve pressure.

3. Engage trigger lock. See Trigger Lock, page 7.

If you suspect the spray tip or hose is clogged or 
that pressure has not been fully relieved after fol-
lowing the previous steps, VERY SLOWLY loosen 
tip guard retaining nut or hose end coupling to 
relieve pressure gradually, then loosen completely. 
Clear hose or tip obstruction. Read Unclogging 
Spray Tip, page 14.

Always engage the trigger lock when you stop 
spraying to prevent the gun from being triggered 
accidentally by hand or if dropped or bumped.

ti9168a

ti8923a

ti8922a