Graco 311762 Manual De Usuario

1. Insert SwitchTip. Insert seat and OneSeal.

NOTE: Before screwing tip and guard assembly on 
gun, perform Pressure Relief Procedure, page 7, 
and be sure gun trigger safety is ON.

2. Screw assembly onto gun. Hand tighten.

1. Release trigger, put trigger safety ON. Rotate 

SwitchTip. Take trigger safety OFF and trigger 
gun to clear the clog. 

2. Put trigger safety ON, return SwitchTip to original 

position, take trigger safety OFF and continue 
spraying.

3. If you suspect the spray tip or hose is clogged or 

that pressure has not been fully relieved after follow-
ing the steps above, VERY SLOWLY loosen tip 
guard retaining nut or hose end coupling to relieve 
pressure gradually, then loosen completely. Clear 
hose or tip obstruction.

ti5257ba

ti21142a

ti5402a

ti20728a