Graco 332158 Manual De Usuario

1. Connect appropriate Graco high-pressure hose to 

sprayer. Tighten securely.

NOTE: Remove second gun port plug for multiple 
guns and repeat steps 1 - 4.

2. Connect other end of hose to gun and tighten fit-

tings securely.

3. Remove tip guard.

4. Install clean inlet strainer.

5. Fill throat packing nut with TSL to prevent prema-

ture packing wear. Do this each time you spray and 
store.

6. Check engine oil level. Add SAE 10W-30 (summer) 

or 5W-20 (winter), if necessary.

7. Fill fuel tank.

8. Check hydraulic oil level, Component ID, page ##. 

Add only Graco Hydraulic Oil, ISO 46 169236 (5 
gallon/18.9 liter) or 207428 (1 gallon/3.8 liter). 
Hydraulic tank capacity is approximately 4.0 gallons 
(15.14 liters).

9. Verify all hose/fitting connections are tight.

10. Attach sprayer grounding clamp to earth ground to 

prevent static charge build-up that may result in fire. 

ti7112b

ti7130b

ti7122b

ti5239a

Approximate 
Fill Level

ti5240a

Scale: -
Artist: J. Iverson

(cold)

ti5241a

ti5242a

ti5243a

ti20971a

ti7525a