Citizen SR-281N Manual De Usuario
File name : CBM_SR-281N_IB_English_black_v09330.doc
Date: 2009/3/30 Trimmed Size : 140 x 75 mm SCALE 1 : 1
-E2-
General
Guide
Turning on or off
To turn the calculator on, press [ ON/C ] ; To turn the calculator off,
press [ 2nd ] [ OFF ].
press [ 2nd ] [ OFF ].
Battery replacement
The calculator is powered by two alkaline batteries (G13 or LR44).
When the display dims, replace the batteries. Be careful not to be
injured when you replace the battery.
1. Unscrew the screws on the back of the calculator.
2. Insert a flat bladed screwdriver into the slot between the upper and
When the display dims, replace the batteries. Be careful not to be
injured when you replace the battery.
1. Unscrew the screws on the back of the calculator.
2. Insert a flat bladed screwdriver into the slot between the upper and
lower case then carefully twist it to separate the case.
3. Remove both batteries and dispose of them properly. Never allow
children to play with batteries.
4. Wipe off the new batteries with a dry cloth to maintain good contact.
5. Insert the two new batteries with their flat sides (plus terminals) up.
6. Align the upper and lower cases then snap them to close together.
7. Tighten the screws.
5. Insert the two new batteries with their flat sides (plus terminals) up.
6. Align the upper and lower cases then snap them to close together.
7. Tighten the screws.
Auto power-off function
This calculator automatically turns it off when not operated for
approximately 6~9 minutes. It can be reactivated by pressing [ ON/C ]
key and the display, memory, settings are retained.
approximately 6~9 minutes. It can be reactivated by pressing [ ON/C ]
key and the display, memory, settings are retained.
Reset operation
If the calculator is on but you get unexpected results, press [ MODE ]
[ 4 ] ( RESET ) in sequence. A message appears on the display to
confirm whether you want to reset the calculator and clear memory
contents.
[ 4 ] ( RESET ) in sequence. A message appears on the display to
confirm whether you want to reset the calculator and clear memory
contents.
RESET : N Y
Move the cursor to " Y " by [
], then press [=] to clear all variables,
pending operations, statistical data, answers, all previous entries, and
memory; To cancel the reset operation without clearing the calculator,
please choose " N ".
memory; To cancel the reset operation without clearing the calculator,
please choose " N ".
If the calculator is lock and further key operations becomes impossible,
please use a pointed object to press the reset hole to release the
condition. It will return all settings to default settings.
please use a pointed object to press the reset hole to release the
condition. It will return all settings to default settings.
Contrast adjustment
Pressing the [ – ] or [ + ] following [ MODE ] key can make the contrast
of the screen lighter or darker. Holding either key down will make the
display become respectively lighter or darker.
of the screen lighter or darker. Holding either key down will make the
display become respectively lighter or darker.