Graco 16N654 Manual De Usuario
Operation
18
3A2308C
Unclogging Spray Tip/Guard
Assembly
Assembly
1.
To unclog tip obstruction, engage trigger lock and
put prime/pressure relief valve UP to relieve pres-
sure.
put prime/pressure relief valve UP to relieve pres-
sure.
2.
Reverse spray tip to UNCLOG position.
3.
Aim sprayer at waste area, disengage trigger lock,
and put prime/pressure relief valve DOWN to spray
position. Pull trigger to clear clog.
and put prime/pressure relief valve DOWN to spray
position. Pull trigger to clear clog.
4.
Engage trigger lock. Put prime/pressure relief valve
UP to relieve pressure and rotate spray tip back to
SPRAY position.
UP to relieve pressure and rotate spray tip back to
SPRAY position.
5.
Disengage trigger lock, put prime/pressure relief
valve DOWN to spray position, and resume spray-
ing.
valve DOWN to spray position, and resume spray-
ing.
6.
If tip is still clogged, it may be necessary to repeat
steps 1 - 5 and rotate the tip from SPRAY to
UNCLOG several times. Repeat step 1 to release
pressure, remove and clean filter, or replace with
new tip assembly.
steps 1 - 5 and rotate the tip from SPRAY to
UNCLOG several times. Repeat step 1 to release
pressure, remove and clean filter, or replace with
new tip assembly.
7.
When obstruction is cleared, engage trigger lock
and rotate arrow-shaped handle back to SPRAY
position.
and rotate arrow-shaped handle back to SPRAY
position.
Always perform the Pressure Relief Procedure
(page 9) before unclogging spray tip.
(page 9) before unclogging spray tip.
ti19350a
ti19347a
ti19370a
ti19374a
ti19346a
ti19350a
ti19347a
ti19371a
ti19374a
ti19346a
ti19349a
ti19350a
ti19371a