Graco 16N654 Manual De Usuario
Operation
3A2308C
21
Cleaning Sprayer Exterior
Wipe paint off outside of sprayer using a soft cloth
moistened with water or flushing fluid. Do NOT sub-
merge the sprayer or pump.
moistened with water or flushing fluid. Do NOT sub-
merge the sprayer or pump.
Storage
1.
Fill material cup 1/3 full with mineral spirits solvent
or dilute a 4 oz. bottle of Pump Armor concentrate
with an additional 4 oz. of water in material cup and
liner.
or dilute a 4 oz. bottle of Pump Armor concentrate
with an additional 4 oz. of water in material cup and
liner.
2.
Connect cup to sprayer, put prime/pressure relief
valve to UP position.
valve to UP position.
3.
Disengage trigger lock, turn sprayer upside-down
and trigger for approximately 10 seconds to recircu-
late material.
and trigger for approximately 10 seconds to recircu-
late material.
4.
Reverse tip to UNCLOG position. Put prime/pres-
sure relief valve DOWN to spray position and trigger
sprayer through tip into waste area for 1- 2 seconds.
sure relief valve DOWN to spray position and trigger
sprayer through tip into waste area for 1- 2 seconds.
5.
Properly dispose of used storage fluid from material
cup.
cup.
6.
Recharge battery to full charge before storage. See
Charging the Battery, page 7.
Charging the Battery, page 7.
7.
Store sprayer indoors in a cool, dry place. Never
store sprayer with material in the cup.
store sprayer with material in the cup.
This sprayer is equipped
with a static wick that
reduces the build up of
static charge to reduce the
risk of fire and explosion.
KEEP THIS SURFACE
CLEAN OF OVERSPRAY.
with a static wick that
reduces the build up of
static charge to reduce the
risk of fire and explosion.
KEEP THIS SURFACE
CLEAN OF OVERSPRAY.
ti19400a
ti19405a
ti19384a
ti19347a
ti19374a
ti19358a
ti19370a
ti19346a
ti19366a