3M Series 52 Manual De Usuario

5

3M spray guns were designed from the inside out for the effective, efficient, economical application of paints, adhesives, 

coatings and finishes. These spray guns deliver large spray patterns with very low overspray. The soft, tight, adjustable 

pattern with complete atomization results in a high finish quality and absolute control. Each light weight spray gun is 

designed for easy handling, reliability and durability and for minimum maintenance costs. 

3M’s Automatic HVLP spray guns deliver superior atomization for a wide range of coatings. The standard spray gun
body is made of light weight aluminum. The Zinc HVLP Automatic Spray Gun body is made of composite material. 
Manufactured for durability and dependability, both versions are easy to maintain for long-lasting performance.

3M equipment is for professional use only. Hazards can occur from equipment misuse. Any misuse of the equipment 
or accessories, such as over pressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or
damaged parts can cause serious bodily injury, fire, explosion or property damage.

Unpacking
Remove the components from the box. Inspect for concealed damage and/or missing items. If you discover any damage
and/or missing pieces, contact your distributor immediately.

* Maximum inlet pressure will yield approximately 10 psi at the air cap.

3M™ Series 52 HVLP Automatic Spray Gun
All Series 52 HVLP Automatic Spray Guns are non-bleed 
spray guns with low pressure air inlets and a manual rear fan 
control. These spray guns are available with an aluminum 
gun body, 10 cfm air consumption, 1:1 reduction ratio, ¾” air 
inlet connection, and a 10 psi maximum inlet air pressure*.
These spray guns are most commonly used for stationary or 
reciprocator mounting applications.