Harbor Freight Tools 66222 Manual De Usuario

SKU 66222

For technical questions, please call 1-800-444-3353.

Page 3

remove or cover objects from the

area that you want to protect from

overspray or paint dust.
Operate only in a well-ventilated

area. Paint thinners and solvents

may be harmful if breathed. Always

wear an ANSI approved ventilator

when painting.
do not operate the tool in explo-

sive atmospheres, such as in the

presence of flammable liquids,

gases, or dust. The tool is able to

create sparks resulting in the ignition

of the dust or fumes.
Keep bystanders, children, and

visitors away while operating the

tool. Distractions are able to result in

the loss of control of the tool.

Personal safety

Stay alert. Watch what you are do-

ing and use common sense when

operating the tool. Do not use the

tool while tired or under the influ-

ence of drugs, alcohol, or medica-

tion. A moment of inattention while

operating the tool increases the risk

of injury to persons.
dress properly. do not wear loose

clothing or jewelry. contain long

hair. keep hair, clothing, and

gloves away from moving parts.

Loose clothes, jewelry, or long hair

increases the risk of injury to persons

as a result of being caught in moving

parts.
avoid unintentional starting. Be

sure the trigger is off before con-

necting to the air supply. Do not

carry the tool with your finger on the

trigger or connect the tool to the air

supply with the trigger on.
do not overreach. keep proper

footing and balance at all times.

Proper footing and balance enables

better control of the tool in unexpect-

ed situations.

use safety equipment. A

dust mask, non-skid safety

shoes and a hard hat must

be used for the applicable

conditions. Wear protec-

tive work gloves during use.

always wear eye protec-

tion. Wear ANSI-ap-

proved safety goggles.

always wear hearing

protection when using

the tool. Prolonged expo-

sure to high intensity noise

is able to cause hearing

loss.

tool use and care

use clamps or another practical

way to secure and support the

work piece to a stable platform.

Holding the work by hand or against

the body is unstable and is able to

lead to loss of control.
do not force the tool.

Use the

correct tool for the application. The

correct tool will do the job better and

safer at the rate for which the tool is

designed.
do not use the tool if the trigger

does not turn the tool on or off.

Any tool that cannot be controlled