Graco GM100 Manual De Usuario
Connect
Connect
Connect Solenoid
Solenoid
Solenoid Valve
Valve
Valve
1.
Connect 1/4 in. diameter air supply tubing to a
clean, dry, and non-lubricated air supply and to
the push-to-connect air inlet fitting (L).
clean, dry, and non-lubricated air supply and to
the push-to-connect air inlet fitting (L).
Figure 6 Air Inlet Fitting
2.
Connect solenoid valve (J) to 24 VDC signal.
See
See
NOTE:
NOTE:
NOTE: A 6 mm tube fitting is included with the
applicator. The fitting can be changed using a 5
mm Allen wrench.
mm Allen wrench.
Connect
Connect
Connect Triggering
Triggering
Triggering Device
Device
Device
All GM100 valves use a 24 VDC solenoid valve.
Improper electrical connection can result in electric
shock. All electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
shock. All electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
Figure 7 Solenoid Valve Electrical Connector
Standard
Standard
Standard Wiring
Wiring
Wiring Colors
Colors
Colors
Terminal
Terminal
Terminal Cable
Cable
Cable
Function
Function
Function
M8
M8
M8
Plus (+)
24V Supply
Brown
Minus ( - )
Return
Blue/Black
Before
Before
Before Using
Using
Using Equipment
Equipment
Equipment
The equipment was tested with canola oil, which is
left in the fluid passages to protect parts. To avoid
contaminating your fluid with oil, prime the equipment
with hot melt until all of the oil is pushed out before
using the equipment. See
left in the fluid passages to protect parts. To avoid
contaminating your fluid with oil, prime the equipment
with hot melt until all of the oil is pushed out before
using the equipment. See
.
10
334627D