Echo SHC-225 Manual De Usuario

Label shows minimum spacing for front handle location.

1.  Position front handle in comfortable operating position and 

tighten screws.

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor 

performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage 

section of this manual.

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are 

NOT approved for use in ECHO 2-stroke gasoline engines.  Use of alternative fuels may cause performance prob-

lems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, 

improper clutch engagement.  Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carbu-

retors and other engine components.

 

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up 

to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alco-

hol) is NOT approved.

Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD Standards must 

be used. Echo brand premium Power Blend X 

TM

 Universal 2-Stroke Oil meets these standards. Engine problems due to 

inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD certified oil, such as 

Echo premium Power Blend X 

TM

, will void the two-stroke engine warranty.  

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete 

stop before removing obstructions, clearing debris, or servicing unit.

Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is equipped with 

a spark arrestor and a spark arrestor may be required.  The operator should contact local fire agencies for laws or 

regulations relating to fire prevention requirements.