Echo SHC-225 Manual De Usuario

1.  Throttle

 

Release throttle and allow engine to return to idle before shutting 

off engine.

2.  Stop Switch

 

Move stop switch button (A)  backward to STOP position.

If engine does not stop when stop switch is moved to STOP posi-

tion, close choke - COLD START position - to stall engine. Have 

your ECHO dealer repair stop switch before using hedge clipper 

again or serious personal injury may result.

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas.  Breathing CO can cause unconscious-

ness, serious injury, or death. Exhaust can cause serious burns.  ALWAYS position unit so that exhaust is directed 

away from your face and body.

Hedge Clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Avoid touching blades whenever pos-

sible, and always wear gloves to protect hands. 

1.   Always grip throttle handle with right hand and support handle 

with left hand while trimming.

2.  Hold trimmer firmly and squeeze throttle trigger to accelerate 

engine.

3.  Tilt trimmer so cutting teeth are angled slightly toward the hedge 

or shrub and proceed to cut.

Never remove hands from unit when blades are moving.

The engine continues running even when the blades have stopped 

due to an obstruction. If this occurs, stop the engine, disconnect 

ignition cable and remove the obstruction.