Echo HCA-265 Manual De Usuario

Tools required:   Flat  file, screwdriver

Parts required:   None

Hedge Clipper Blades are very sharp.  Wear gloves to protect 

hands.

Blades should only be removed and reinstalled by an Authorized 

ECHO Servicing Dealer, otherwise premature wear or internal 

damage may occur.

1.  Disconnect spark plug wire from spark plug.

2.  Slide blades to allow file clearance using slots (A) on bottom of 

blades. Do not pry against cutting edges.

3.  Follow the original shape, and file each cutting edge carefully to 

avoid damage to adjacent teeth. Maintain 6 mm (.25 in.) radius at 

base of each tooth.

If a power grinder is used, DO NOT allow blade to over heat.

4.  Lubricate blades.  See “Lubrication” on page 22.

5.  Connect spark plug wire.

Tools Required:  Long 4 mm hex wrench, 8 mm socket wrench with 

extension. 

1.  Move stop switch to STOP position.

2.  Disconnect spark plug wire.

Hedge clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Use long hex wrenches and sockets with 

extensions when tightening blade screws and blade locknuts to keep 

hands at a safe distance from sharp blades. 

3.  Tighten blade screws (A) securely.

4.  Hold blade screws (A) to prevent turning, and tighten locknuts (B).