Black & Decker LHT2436B Manual De Usuario

NOT CONTINUE to use under these conditions. Follow the charging

procedure. You may also charge a partially used pack whenever

you desire with no adverse affect on the battery pack.

5. Foreign materials of a conductive nature such as, but not limited

to, steel wool, aluminum foil, or any buildup of metallic particles

should be kept away from charger cavities. Always unplug the

charger from the power supply when there is no battery pack in the

cavity. Unplug charger before attempting to clean.

6. Do not freeze or immerse charger in water or any other liquid.

wArNINg:

Shock hazard. Do not allow any liquid to get

inside charger. Never attempt to open the battery pack for any

reason. If the plastic housing of the battery pack breaks or cracks,

return to a service center for recycling.

INSTALLINg / reMOVINg BATTery PACk

wArNINg:

Make certain the lock-off button is engaged to

prevent switch actuation before removing or installing battery.

TO INSTALL BATTery PACk:

Insert battery pack into tool until fully

seated and an audible click is heard (figure

2). Make sure battery pack is fully seated

and fully latched into position.

TO reMOVe BATTery PACk: Depress

the battery release button in the back of the

battery pack and pull battery pack out of tool.

STATe Of CHArge INdICATOr

(fIgUre 2a)

The battery is equipped with a state of

charge indicator. This can be used to display the current level

of charge in the battery during use and

during charging. It does not indicate tool

functionality and is subject to variation based

on product components, temperature and

end-user application.

CHeCkINg STATe Of CHArge dUrINg

USe (fIgUre 2b):

• Press the state of charge indicator button (B1).

• The four LED’s (B2) will illuminate

indicating the percent of charge in the

battery. See chart in figure 2b.

• If LED light does not illuminate,

charge battery.

OPerATION

SwITCH

To turn the unit “ON”, slide the lock off

button, shown in figure 3, backward and

squeeze the trigger switch. Once the unit is

running, you may release the lock off button.

In order to keep the unit running you must

continue to squeeze the trigger. To turn the

unit “OFF”, release the trigger.

wArNINg:

Never attempt to lock a

switch in the ON position.

TrIMMINg INSTrUCTIONS

1. wOrkINg POSITION – Maintain

proper footing and balance and do not

overreach. Wear safety goggles, non-

skid footwear when trimming. Hold the

unit firmly in both hands and turn the

unit ON. Always hold the trimmer, as

shown in the illustrations in this manual,

with one hand on the switch handle and

one hand on the bail handle. (figure 4)

Never hold the unit by the blade guard.