Jonsered HTE2123 Manual De Usuario
English
– 15
WORKING TECHNIQUES
•
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
attachment. This is extremely sharp and can easily cause
cuts.
•
Store the machine out of reach of children.
•
Use only original spare parts for repairs.
Basic working techniques
•
Work with a swinging action from the bottom upwards
when trimming sides.
when trimming sides.
•
Adjust the throttle setting to suit the load.
•
When trimming a hedge the engine should always face
away from the hedge.
away from the hedge.
•
Hold the machine as close to your body as possible to get
the best balance.
the best balance.
•
Make sure that the tip does not touch the ground.
•
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
branches have been cut back cleanly.
Changing the hedge trimmer angle
•
Undo the knob.
•
Adjust the angle with the help of the handle on the cutting
unit.
unit.
•
Tighten the knob.
Transport position
Once the work has been completed fold the cutting unit back
against the shaft to simplify transport and storage of the
hedge trimmer.
against the shaft to simplify transport and storage of the
hedge trimmer.
1
Turn off the engine.
2
Undo the knob.
!
WARNING! Do not hold the cutting head
when you adjust the angle. The blades are
sharp and you could easily cut yourself.
when you adjust the angle. The blades are
sharp and you could easily cut yourself.