Olympus LS-100 Manual De Usuario

U

sin

g t

he r

ec

ord

er o

n y
ou

r P

C

1

Click [

] on the task bar located 

at the lower-right corner of the 
screen. Click [Safely remove USB 
Mass Storage Device]

• The drive letter will differ depending 

on the PC being used.

1

Drag and drop the drive icon for 
this recorder displayed on the 
desktop to the Recycle Bin icon

2

Make sure that the recorder [PEAK] 
indicator light (R) is off before 
disconnecting the USB cable

• The [PEAK] indicator light (R) will 

light up orange while the recorder 
is charging. The USB cable may 
be removed during the charging 
operation.

2

Be sure that the recorder [PEAK] 
indicator light (R) is off before 
disconnecting the USB cable

• The [PEAK] indicator light (R) will 

light up orange while the recorder 
is charging. The USB cable may 
be removed during the charging 
operation.

  Note

•  NEVER disconnect the USB while the [PEAK] indicator light (R) is flashing. If you do, the data may be 

destroyed.

•  When the recorder is connected to a PC, the power will be supplied from the USB cable supplied with the 

recorder. No power supply is required from the batteries or the AC adapter to this recorder.

•  For more information on the USB port on your PC, refer to the user's manual for your PC.
•  Be sure to connect the USB cable directly to the USB port on your PC.
•  Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.
•  Release the recorder from HOLD.