Chicago Electric 68853 Manual De Usuario

Page 9

Item 68853 

        

1.  Designate a work area that is clean and well-lit.  

The work area must not allow access by children 

or pets to prevent distraction and injury.

2.  Secure loose work pieces using a vise or clamps 

(not included) to prevent movement while working.

3.  There must not be objects, such as utility lines, 

nearby that will present a hazard while working.

1.  Slide the Direction Switch (which should initially 

be centered in the “lock” position) to the right for 

forward drilling/fastening, or to the left for reversing 

the operation. Use the “reverse” setting only to 

remove screws or to release jammed drill bit.

2.  The LED Work Light can be activated before the 

Driver runs by pressing the Trigger lightly.  Then 

press the Trigger harder to activate the Impact Driver.  

3.  The Impact Driver has variable speed.  To increase 

speed, apply more pressure to Trigger.  To 

decrease speed, lessen pressure on Trigger.

4.  When finished using the Impact Driver, release 

the Trigger and center the Direction Switch to lock 

the trigger mechanism as a safety measure.

5.  Remove the Battery Pack. 

6.  Clean then store the Impact Driver 

indoors and out of children’s reach.