Harbor Freight Tools 93793 Manual De Usuario
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 3
SKU 93793
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Item Description
Welding Current
35 ~ 140 Amps
Duty Cycle
18% @ 140 Amps / 100% @ 45 Amps
(Refer to chart and explanation on page 18)
(Refer to chart and explanation on page 18)
Power Consumption
230 Volt / 60 Hz / Single Phase / 25 Amps
(Should be connected to a 25 Amp minimum dedicated circuit)
(Should be connected to a 25 Amp minimum dedicated circuit)
Open Voltage
15.5 - 20 Volts
Required Power Plug Type
3-Prong, 220 VAC, polarized, twist lock (not included)
NEMA #L6-30 or equivalent
NEMA #L6-30 or equivalent
Power Cord Rating
12 AWG x 3C x 6’ Long
Gas Inlet Size
1/4”
Ground Cable
4 Gauge / 6’ Long
Torch Power Cable
8 Gauge / 6’ Long
Thermal Overload Protection (with Light)
Automatic shutdown and restart after cool down
Wire Size
0.23” to 0.035”
Wire Spool Size
7-3/4” Diameter
Included Torch Tip Size
0.030”
Accessories
Wheel Kit / Wire Spool / Torch Assy. / Grounding Clamp
Wire Brush & Hammer / Spare 1.0 & 0.8 Welding Tips
Hand-Held Face Shield
Wire Brush & Hammer / Spare 1.0 & 0.8 Welding Tips
Hand-Held Face Shield
Net Weight
103 Pounds