Agilent Technologies 8164A Manual De Usuario
Measurement Functions – The SENSe Subsystem
Measurement Operations & Settings
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
85
Measurement Functions – The
SENSe Subsystem
SENSe Subsystem
The SENSe subsystem lets you control measurement parameters for a
Power Sensor, an Optical Head Interface module, or a return loss module.
Power Sensor, an Optical Head Interface module, or a return loss module.
Agilent 81635A and Agilent 81619A - Master
and Slave Channels
and Slave Channels
For the Agilent 81635A Dual Power Sensor and Agilent 81619A Dual
Optical Head Interface module, channel 1 is the master channel and
channel 2 is the slave channel. The master and slave channels share the
same software and hardware triggering system. For some commands,
setting parameters for the master channel sets the parameters for the
slave channel. In these cases, you may only set parameters for the slave
channel by setting master channel parameters.
Optical Head Interface module, channel 1 is the master channel and
channel 2 is the slave channel. The master and slave channels share the
same software and hardware triggering system. For some commands,
setting parameters for the master channel sets the parameters for the
slave channel. In these cases, you may only set parameters for the slave
channel by setting master channel parameters.
The commands listed in Table 5 can only be configured using the master
channel.
channel.
Table 5 Commands that can only be configured using the master channel
Command
Page
:INITiate[n]:[CHANnel[m]][:IMMediate]
:INITiate[n]:[CHANnel[m]]:CONTinuous/?
:READ[n][:CHANnel[m]][:SCALar]:POWer[:DC]?
:SENSe[n]:[CHANnel[m]]:CORRection:COLLect:ZERO
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:LOGGing/?
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:MINMax/?
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:STABility/?
:SENSe[n][:CHANnel[m]]:FUNCtion:STATe/?
:SENSe[n]:[CHANnel[m]]:POWer:ATIME/?
:SENSe[n]:[CHANnel[m]]:POWer:RANGe:AUTO/?
:TRIGger[n][:CHANnel[m]]:INPut/?
:TRIGger[n][:CHANnel[m]]:INPut:REARm/?
:TRIGger[n][:CHANnel[m]]:OUTPut/?
:TRIGger[n][:CHANnel[m]]:OUTPut:REARm/?