Maytag W10600814B Manual De Usuario

■

Is the display flashing “F” or “C” and numbers? If “F” or 
“C” and a number are alternately flashing on the display, refer 
to the following table for possible solutions.

■

Is the oven door open?
Close the oven door all the way.

■

Has the function been entered?
See “Self-Cleaning Cycle” section.

■

On some models, has a delay start Self-Clean cycle been 
set?
See “Self-Cleaning Cycle” section.

■

Has a delay start been set?
See “Timed/Delay Cooking” section.

■

Is the range level?
Level the range. See the Installation Instructions.

■

Is the proper temperature set?
Double-check the recipe in a reliable cookbook.

■

Is the proper oven temperature calibration set?
See “Oven Temperature Control” section.

■

Was the oven preheated?
See “Baking” and “Broiling” sections.

■

Is the proper bakeware being used?
See “Bakeware” section.

■

Are the racks positioned properly?
See “Positioning Racks and Bakeware” section.

■

Is there proper air circulation around bakeware?
See “Positioning Racks and Bakeware” section.

■

Is the batter evenly distributed in the pan?
Check that batter is level in the pan.

■

Is the proper length of time being used?
Adjust cooking time.

■

Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer 
cooking times.

■

Are baked items too brown on the bottom?
Move rack to higher position in the oven.

■

Are pie crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or 
reduce baking temperature.

■

Is there a low humming? 
This sound occurs when cooking at high power. The cause of 
this sound is the amount of energy that is transmitted from 
the appliance to the cookware. This sound will quiet or go 
away when the power is turned down.

■

Is there a crackling? 
This sound occurs when cookware is used that consists of 
different materials. The noise is caused by vibrations in the 
joint faces between the different layers. The sound may 
change depending on the amount and type of food being 
cooked.

■

Is there a fan noise? 
The electronics require a controlled temperature in order to 
function reliably. The cooktop is fitted with a fan that runs at 
various speeds according to the temperature detected during 
cooktop and oven operation. The fan may also continue to 
run even after the cooktop and/or oven has been switched 
off, if the temperature it detects is too high. In some cases the 
fan may run for an extended period of time. This is 
considered normal.

An object, liquids 
or soils are 
putting pressure 
on the control 
panel.

Thoroughly wipe or 
remove any object on 
touch keys.

The power 
voltage is too low 
or too high.

Turn off the cooktop. 
Wait 5 seconds, then 
turn it back on. If this 
continues, contact a 
qualified electrician.

The surface 
cooking area has 
overheated.

The surface cooking 
area automatic shutoff 
was activated. Wait 
5 minutes, for it to cool 
down, then turn it back 
on. Turn off oven if it is 
running a self-cleaning 
cycle.

Call customer service. 
See the “Assistance or 
Service” section.