Hotpoint HDA3700GBB Prospecto

Descargar
Página de 2
Specification Created 1/02
HDA3700G - Hotpoint Built-In Dishwasher
Dishwasher Dimensions (in inches)
Wood Insert Cut-Out 
Dimensions (in inches)
Installation Information 
(in inches)
Note: Dishwasher must not be installed more than 10' from sink
for proper drainage. All plumbing and electrical work must be in
accordance with local codes. Dishwasher includes drain hose
and leveling legs.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Electrical Rating
Voltage AC.......................................................120
Hertz ..................................................................60
Total connected load amperage.......................8.6
Calrod
®
heater watts.......................................500
For use on adequately wired 120-volt, 15-amp
circuit having 2-wire service with a separate
ground wire. This appliance must be grounded
for safe operation.
R
Listed by
Underwriters
Laboratories
This wall area
must be free of
pipes or wires
Countertop
4
6
Hot
water
line on
left
4
4
2
Plumbing and electrical
service must enter
inside shaded area
24" From wall
24" MIN.
90°
19" MIN. from wall
24"
MIN.
6
34-1/2±1/4"
Underside
of countertop
to floor
5
5
90°
Electrical
wiring on
right
Electrical
wiring is
3" from
cabinet
24
25-3/4 
MAX.
21-1/2
3-1/4
4 (Adjustable)
34 MIN.
adj. to  35
24-3/4
23-3/8*
C
B
Access insert
Detail D
Panel Thickness
Door insert
Front 
of 
Panel
A
1-1/2
1/2
1/4
3/4
As an ENERGY STAR
®
 Partner, 
GE has determined that this product 
meets the ENERGY STAR
®
 
guidelines for energy efficiency.
D –Panel 
Kit
A
B
C
Thickness
GPF425
19-3/4"
23-9/16"
3-11/16"
1/4"
3-11/16" to
GPF475
19-7/8"
23-5/8"*
4-1/4"**
3/4"
*Bottom of panel must be notched 1-1/2" x 1/2" to clear
access panel. (See illustration above)
**Adjustment required to match adjacent cabinet fronts due to 
leveling adjustment, 4" nominal.