Hotpoint HDA3530 Manual De Usuario

HI TEMP Provides extra heat for best performance. It is used best with 

WASH ON/ heavily-soiled dishes.

HI TEMP Turns 

off.

HEATED DRY/ Turns the heating element on for fast drying. This option will extend 

HEATED DRY ON the time of your wash cycle.

HEATED DRY OFF Turns 

off. Dishes air dry naturally and energy 

is saved.

ENERGY SAVER Turns all options off.

Control Settings

POTS & PANS/ For heavily soiled dishes or cookware with dried-on or baked-on soils.
HEAVY WASH Everyday dishes may be included. This cycle will not remove 

burned-on foods.

NORMAL WASH For loads of everyday dishes, glasses and cookware with medium 

soils. 

Many dishes have lighter soil than normal. Choosing 

a cycle other than 

will save energy and water.

SHORT WASH For quickly washing loads of everyday dishes with medium soils 

that have not dried on, such as loads consisting mostly of glasses.

LIGHT WASH/ For dishes with light soils. 

RINSE & HOLD For rinsing partial loads that will be washed later. 

Do not use detergent.

PLATE WARMER For warming clean dishes and serving plates. This cycle will take

approximately 32 minutes.

Slowly turn the Dial to the START or ON position, or the selected cycle.
Don’t turn it past the START, ON or cycle position, or you could
accidentally miss a rinse. For models HDA2120 and HDA2130, when
using the POTS & PANS cycle, slowly turn the Dial to the NORMAL/POTS
& PANS 

position and press the POTS & PANS ON button. When using

the NORMAL cycle, slowly turn the Dial to the NORMAL/POTS & PANS
position and press the POTS & PANS OFF button. See About the Dial
Cycles 

section for other cycles on these models. 

There is a time delay between start-up and water fill so you will not
hear any wash action right away. 

■

Latch the door to begin the cycle.

9