Hotpoint DWF30 Manual De Usuario

The purpose of Rinse Aid is to prevent
formation of water marks on tableware and
utensils, and to ensure that glasses are clean
and sparkling. Rinse Aid is consumed during
the rinsing process.

-

To open the lid, press on the 
rinse aid (1) container lid and        
simultaneously lift the lid off the lug (2).

-

Pour the rinse aid into the filler hole 
until the level indicator turns dark.

-

Close the lid, ensuring that it has 
snapped closed.

Only use rinse aids intended for use in
domestic dishwashers,

The amount of rinse aid added to the water
can be varied by adjusting the   control. The
rinse aid control has been factory set at ‘3.5’.
This setting is recommended when Sun All
in One is being used.

Do not alter the setting of the rinse aid con-
trol unless streaks or water marks are left on
the dishes.
Streaks        -  Turn knob towards ‘-’.
Water Marks - Turn knob towards ‘+’.

Rinse aid control.

As long as the rinse aid indicator on the dis-
penser is dark and the indicator on the con-
trol panel  5 is not lit, there is sufficient rinse
aid in the dishwasher.

LOW rinse aid indicator

12

FP105-01 DWF35/34/33/30  12/02/2002  10:23 am  Page 12