CMA Dishmachines CMA-44 Manual De Usuario

Getting Started 

 

The scrap tray assembly and overflow chute, which came packaged inside the 
machine, can easily be installed by executing the following steps: 

illustrates the assembly as it would appear for a Left-to-Right machine – a Right-to-
Left machine would simply be the mirror image. 

 

 

 For proper spacing, the 

SS flat washer (item 2) must not be 
located between the head of the 
trusshead bolt and the inside of the 
machine. 

 

1 

7 

00905.00 

¼-20 X ½” Trusshead Bolt 

6 

4 

00906.00 

¼-20 X ½” Hex Head Bolt 

2 

11 

00924.00 

¼” SS Flat Washer 

7 

1 

17579.00 

Scrap Trap Holder 

3 

11 

00912.00 

¼-20 Nylon Lock Nut 

8 

1 

01577.10 

Scrap Trap Body Molded 

4 

1 

13511.26 

CMA-44P Overflow Gasket 

 

9 

1 

01577.20 

Scrap Trap Drawer Molded 

5 1 

13511.06 

13511.16 

CMA-44P Overflow Chute (L-R) 

CMA-44P Overflow Chute (R-L) 

 

1.  Remove the items from their packing and verify that all the pieces are present. 

2.  Attach the overflow chute with the five ¼-20 X ½” trusshead bolts, ¼” SS Flat Washers, and 

¼-20 Nylon Lock Nuts provided. 

3.  Secure the scrap trap holder to the dishmachine using the four ¼-20 X ½” Hex Head Bolts, 

¼” SS Flat Washers, and ¼-20 Nylon Lock Nuts provided. 

4.  Set the scrap trap body—with the scrap trap drawer inserted—into position on the scrap trap 

holder. 

5.  Attach the drain as specified in section 

.  

MODEL CMA-44 Installation & Operation Manual Rev. 2 .15   10/18/07 

Page

  8