3D Innovations TOCOM 16244678 Manual De Usuario

Used to highlight different items in the TV menu and to adjust the menu

controls.

Indicates the programming mode when programming the remote to

control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.

Enter channel numbers and time settings directly

through the remote control.

To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.

Scans up or down through the current channel list. Press once to

change the channel up or down; press and hold to continue changing channels.

Removes any menu or display from the screen and returns you to normal

viewing.

Returns you to the previous channel.

Brings up the channel banner.

Toggles through the available input sources (VID1/SVID1, VID2/CVID2,

FRNT, VPORT and current channel).

Brings up the Main menu.

Reduces the TV’s volume to its minimum level. Press again to restore the

volume.

When in the menu system, selects highlighted items.

When in TV mode, turns the TV on and off. If in another mode (VCR,

DVD, etc.) and programmed, will turn the component on and off.

Picture options are reset to original factory settings.

Press once before changing channels and the TV will wait 30 seconds before

returning to the original channel. Press repeatedly to add more time.

Turns on the TV and puts the remote in TV mode. Also displays current status.

Decreases or increases the TV’s volume.

 Tunes the TV to the VPORT input channel. You can program this button

to control a VCR or DVD player. When programmed, changes the mode of the
remote when the button is pressed. To restore the VPORT button to factory default
mode (unprogrammed), press and hold VPORT, then press 1, 0, 0, and 0.

In DVD mode, replays the last several seconds of the title you’re playing.

In VCR mode, functions as a TV/VCR button.

Puts the remote in DVD mode and, if auto tuning is enabled, will turn on

the TV and tune to the correct video input channel.

If you’re operating another component that has a guide, this button

accesses the on-screen Guide.

1624467B.02_Remote

4/22/04, 9:04 PM

9