Blue Coat Systems SGOS Version 5.2.2 Manual De Usuario
Volume 9: Managing the Blue Coat SG Appliance
28
Changing Threshold and Notification Properties
The health monitoring threshold and notification properties are set by default. Use the
following procedure to modify the current settings.
following procedure to modify the current settings.
To change the threshold and notification properties:
1.
Select
Maintenance
>
Health
Monitoring
.
2.
Do one of the following:
•
To change the system resource metrics, select
General
.
•
To change the hardware/environmental/ADN metrics, select
Status
.
•
To change the licensing metrics, select
Licensing
.
3.
Select the metric you want to modify.
Voltage
Bus Voltage
CPU voltage
Power Supply voltage
CPU voltage
Power Supply voltage
Critical:
Critical
High-critical
Low-critical
Warning:
High-warning
Low-warning
ADN Connection Status
OK:
Connected
Connecting
Connection Approved
Disabled
Not Operational
Warning:
Approval Pending
Mismatching Approval Status
Partially Connected
Critical:
Not Connected
Connection Rejected
See
Volume 5: Advanced Networking
for
more information about the ADN
metrics.
metrics.
ADN Manager Status
OK:
No Approvals Pending
Not Applicable
Warning:
Approvals Pending
Table 2-3. Status Health Monitoring Metrics (Continued)
Note:
You cannot change the threshold values for metrics in the Status tab.