Thermador SGC456 Manual De Usuario

PAGE 10

• The grates are heavy; use care

when lifting. Place on a protected
surface.

• Blisters/ crazing/ chips are com-

mon due to the extreme tem-
peratures  on grate fingers and
rapid temperature changes.

• Acidic and sugar-laden spills dete-

riorate the enamel. Remove soil
immediately.

• Abrasive cleaners, used too vig-

orously or too often can eventu-
ally mar the enamel.

• Nonabrasive cleaners: Hot water

and detergent, Fantastic, Formula
409. Rinse and dry immediately.

• Mild abrasive cleaners: Bon Ami

®

and Soft Scrub

®

.

• Abrasive cleaners for stubborn

stains: soap-filled steel wool pad.

Grates 

 / 

Porcelain Enamel on

Cast Iron

• Stainless steel resists most food

stains and pit marks providing the
surface is kept clean and protected.

• Never allow food stains or salt to

remain on stainless steel for any
length of time

• Rub lightly in the direction of pol-

ish lines.

• Chlorine or chlorine compounds

in some cleaners are corrosive to
stainless steel. Check ingredients
on label before using.

• Nonabrasive Cleaners: Hot water

and detergent, ammonia, Fantas-
tic

®,

 Formula 409

®

. Rinse and dry

immediately.

• Cleaner Polish: Stainless Steel

Magic

®

 to protect the finish from

staining and pitting; enhances ap-
pearance.

• Hard water spots: Household vin-

egar.

• Mild Abrasive Cleaners:

RevereWare Instant Stainless Steel
Cleaner

®

, Kleen King Stainless Steel

liquid cleaner.

• Heat discoloration: RevereWare In-

stant Stainless Steel Cleaner.

Exterior Finish / Stainless Steel

• Hot sudsy water; rinse and dry

immediately.

• To remove bezels, see Page 5.

• To remove knobs, lift straight up.

Control Knobs and Bezels /
Plastic

• Do not soak knobs or bezels.

• Do not force knobs onto wrong

valve shaft.

 / 

Ceramic

• Carefully wipe with a cotton swab

dampened with water, ammonia or
Formula 409

®.

• Gently scrape soil off with a tooth-

pick.

• Avoid excess water on the igniter.

A damp igniter will prevent burner
from lighting.

• Remove any lint that may be re-

main after cleaning.