Thermador CEF Manual De Usuario

•  Remove all packing materials and literature from 

the cooktop surface.

•  While cool, wipe with a clean, damp sponge and 

dry.

•  Apply the Cooktop Cleaning Creme® packaged 

with the cooktop. Buff with a clean cloth (see page 

14 for daily care instructions)

•  There maybe a slight odor during the fi rst several 

uses; this is normal and will disappear.

•  Optimum cooking results depend on the proper 

cookware being selected and used (see page 12.)

•  The cooking surface will hold the heat and remain 

hot up to 25 or 30 minutes after the elements have 

been turned off. 

•  Read all safety precautions and Care & Use 

Manual information prior to operating.

•  Regular, daily care using the Cooktop Cleaning   

Creme* will protect the surface and make it easier  

to remove food soil and water spots.

•  The glass ceramic cooking surface is a durable   

material resistant to impact but not unbreakable if  

a pan or other object is dropped on it. 

•  Do not use aluminum foil directly on the glass; it  

will melt and damage the glass surface.

•  Do not allow plastic, paper, or cloth to come in    

contact with the hot glass surface; these items can  

melt or burn and damage the glass surface.

•  Do not allow pans to boil dry. This can damage   

the pan, element and/or the cooktop.

•  Never cook food directly on the glass.

•  Avoid placing a wok support ring, trivet or other   

metal stand on the glass surface.

•  Do not use the glass surface as a cutting board.

•  Do not slide cookware across the cooking surface;  

it may scratch the glass.

•  Do not place wet pans on the glass surface.

The element “on’ indicator light glows whenever any 

element is turned on. The light remains lit until all of 

the elements are turned off.

The “ON” light is located to the left of the power pad.

Each element features a hot indicator light to show 

when the cooking surface is too hot to touch. After the 

element is turned off, an “H” will appear in the element 

display. The H remains on until the cooking area has 

cooled to a safe -to-touch temperature.

If an H is lit inside the element display, use caution 

when working or cleaning around the cooktop as the 

cooktop is still hot.

The glass cooking surface retains heat and stays 

hot after the element(s) have been turned off. The 

retained heat may be used to hold foods at serving 

temperatures for a short time.

The panel lock is selected to prevent the control pads 

from being turned on. Touch PANEL LOCK pad , light 

fl ashes and beep sounds. Hold for 3 seconds to acti-

vate. A beep will sound and the panel lock light stays 

lit indicating that the cooktop is locked.

To unlock, touch PANEL LOCK pad and hold for 3 

seconds. A beep will sound and the light will go out 

indicating the cooktop is unlocked. 

The cooktop cannot be locked when surface element 

is operating.

It is recommended to lock the cooktop when not in 

use and for cleaning.

Cooktop Operating Instructions

1

9

8

7

6

5

4

3

2

H

H

H