Smeg GKC755 Manual De Usuario

 

 

   

 

 

Connection to the gas mains may be made with a rigid copper pipe or 
with a flexible pipe and conforming to the provisions defined by
standard regulations in force.  
To facilitate connection, fitting A on the rear of the appliance may be
adjusted laterally. For this purpose, loosen hexagon nut B, turn fitting A
to the desired position, and retighten hexagon nut B (tightness is 
ensured by a biconical brass ring). Use a soapy solution to check for
proper tightness. Never use a free flame.  
The hob has been inspected for G25 (2L 3B/P) at a pressure of 25 
mbar. For use with other types of gases, see Section “5. ADAPTATION 
TO DIFFERENT TYPES OF GAS”. The gas intake fitting is ½” gas
external threaded (ISO 228-1). 

 

   

 

 

  Connection with rigid copper pipe: the 

connection to the gas mains must not 
provoke stress of any kind on the hob. 
Connection may be made by using biconical 
adapter  D with insertion of gasket C 
(supplied). 
 

 

   

 

  Connection with flexible pipe: use only 

flexible pipes conforming to standard 
regulations in force, inserting gasket C 
(supplied) between fitting A and flexible pipe 
E.