GE WV-2HSG Manual De Usuario

WV-FG, WV-2HG, WV-2HSG

VENTLESS GRIDDLE/FRYER/COOKTOPS

I T E M N O .

E L L S

A N U F A C T U R I N G

WELLS

WV-FGRW

(shown with optional drawer warmer)

Griddle

(All Models)

• Griddle surface (17 1/4”W x 18 1/4”D) has

enclosed tubular elements that provide even

heat distribution.
• Griddle is controlled by a positive-off thermostat

adjustable from 100ºF to 400ºF.
• Griddle features include a full-width front grease

trough, an extra-large removable front grease

drawer and a stainless steel splashguard.

Fryer

(WV-FG, WV-FGRW)

• Two half-size, rear hanging, interchangeable fry

baskets are provided.
• Efficient heating element is flat, heavy-duty

stainless steel.
• Fryer on/off switch is located in recessed front

control panel.
• The positive-off thermostat controls the

element allowing for adjustable and more

consistent temperatures.
• The fryer has a manual reset safety thermostat

that will shut off the heating element if an

over-temperature condition is reached.
• Model WV-FGRW includes a Wells RW-26 built-in

standard double drawer warmer that replaces lower

storage cabinet.

Cooktop

(WV-2HG, WV-2HSG, WV-2HGRW, WV-2HSGRW)

• Model WV-2HG has two solid cast iron 9" french

plate elements that are independently regulated by

an infinite control with a positive-off position.
• Model WV-2HSG has two spiral 8" elements that

are independently regulated by an infinite control

with a positive-off position.
• Models WV-2HGRW and WV-2HSGRW include a

Wells RW-26 built-in standard double drawer

warmer that replaces lower storage cabinet.

M O D E L

W V- 2 H G

G R I D D L E , 2 C A ST I R O N E L E M E N TS

*RW Models include optional RW-26 built-in standard double drawer warmers.
NOTE: Specifications are subject to change without notice.
SPECIAL ENVIRONMENTAL NOTICE: The hood system is designed to reduce odor emissions but will not eliminate odors.

Air exchange at the installation site must comply with requirements of the local jurisdictional authority. To ensure dilution of

odor build-up, minimum recommendation is 400 cubic feet of fresh air per minute both in and out of the area.

D I M E N S I O N S :

E146882

LISTED

E146882

STD.4

INCH

(MM)

E L L S

A N U F A C T U R I N G

BACK

SIDE

BOTTOM

TOP

SEE REQUIRED

SPACERS

(152)

(203)

(533)

(687)

27 1/16

(771)

30 3/8

(914)

(2010)

79 1/8

(578)

22 3/4

(898)

35 3/8

(1076)

42 3/8

(441)

17 3/8

(1237)

48 11/16

AND PLUG

SUPPLY CORD

6 FT. POWER

SHIELDS

SPACERS & SIDE

6" CLEARANCE

REQUIRED

EXHAUST

AIR

OPENING

PANEL

CONTROL

COOKING SURFACE ILLUSTRATION

9" DIA SOLID CAST IRON ELEMENTS

GRIDDLE: 17 1/4 X 18 1/4

WELLS MANUFACTURING COMPANY

2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: (775) 345-0444 • FAX: (775) 345-0569
FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142
www.wells-mfg.com
© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.
05/02 • REV(-) • PART NO. 304421-2

W V- 2 H G E L E CT R I C A L S P E C I F I C AT I O N S :

MODELS VOLTS WATTS AMPS PER LINE 3 PHASE

POWER SUPPLY CORD

L1 L2

WV-2HG 208 8000 16 32 23

NEMA 15-60P

WV-2HG 240 9900 18 35 24

NEMA 15-60P

WV-2HGRW* 208 8675 19 32 26

NEMA 15-60P

WV-2HGRW* 240 10800 21 35 27

NEMA 15-60P

MINIMUM CLEARANCE REQUIRED FROM UNIT

TO THE NEAREST SURFACE

The ventless hood gives you the flexibility to “set up shop” just

about anywhere from malls, stadiums and high-rise buildings

to basement kitchens and kiosks.

Ventless Hood

(All Models)

• Ventless Hood System exceeds EPA Standard

202 for the release of particulate matter.
• Interlock System will not allow heating

elements to be energized if any of the filters

are not in place.
• Airflow Sensing System continually monitors

airflow through the filtration system, optimizing

performance and grease removal.
• Ansul

R-102 Fire Suppression System

is built into the ventless hood to provide

ultimate protection.
• Shatter-resistent interior light for

improved visibility.