Miele H 346 Manual De Usuario
. . . cakes or biscuits are unevenly
browned.
browned.
There will always be a slight uneven-
ness. Product information sheets give a
percentage result for standard brown-
ing tests. These refer to results for one
tray.
ness. Product information sheets give a
percentage result for standard brown-
ing tests. These refer to results for one
tray.
If the item being baked is browning
very unevenly, check:
very unevenly, check:
– when baking with
"Fan Heat
D
"
:
whether the temperature was set too
high,
high,
whether the roasting filter was in
place,
place,
whether the correct runner height
was used.
was used.
– when baking with
"Conventional
A
"
:
the colour and composition of the
baking tins being used. Light col-
oured, shiny, or thin walled tins are
less suitable,
baking tins being used. Light col-
oured, shiny, or thin walled tins are
less suitable,
whether the correct runner height
was used.
was used.
. . . the display light does not come
on when a hob control is switched
on (depending on the model).
on when a hob control is switched
on (depending on the model).
The lamp needs changing.
The lamp must be changed by Miele
customer service.
The lamp must be changed by Miele
customer service.
. . . there has been a power failure,
and instead of the time of day "0
and instead of the time of day "0
·
00"
and "AUTO" flash in the display.
All pre-set times are deleted as a result
of the power failure.
of the power failure.
Enter the time of day again, and any
other pre-set data.
other pre-set data.
. . . "0
·
00" appears when the audible
tone is switched off.
This is not a fault.
The time of day will shortly reappear in
the display field.
The time of day will shortly reappear in
the display field.
. . . "AUTO" flashes in the timer dis-
play.
play.
This might signal a data entry mistake,
– for example entering conflicting
times.
– if the time of day is changed while a
start and finish time have been pre-
set.
set.
– when the audible tone is switched off
by pressing the "g" and ")" but-
tons.
tons.
Correcting minor faults
53